Showroom 17-21 Riversdale Road Newtown Map ____________________________________________________________________________________ Visit Shower Screens online
Mon-Fri 8am-4pm
1300 241 305

Glass Processing

Glass Processing

The Edge Glass & Stone has an extensive processing department at our premises, where we can offer mirrors and glass with polished edges and drilled to your requirements, with a quick turnaround and very competitive rates.

We pride ourselves on quality workmanship and service, so whether you order a small piece of glass for a picture frame or a large piece of glass for a glass room divider we will give you the same service with a smile.

Glass sheets are available in a variety of sheet sizes, the largest being 36600mm x 2440mm. We can cut from bigger sheet sizes upon request; this will incur additional costs and extend the lead-time.

Give us your ideas and we’ll make them a reality. Our glass sheets are cut utilising the latest technology and automatic cutting and breakout tables. You can rest assured your order will be processed quickly and your glass will be cut with quality precision and perfection.

Our ability for customisation, coupled with quality and perfection makes The Edge Glass & Stone the perfect choice.

When glass panes are cut, it contains micro cracks which can be dangerous during handling. Arrising is the process in which the edge and corners of a piece of ordinary glass is smoothened to ensure no sharpness remains. This helps prevent breakage and makes the glass safer to handle.

We can drill holes into any thickness flat glass at our factory premises.

Hole sizes available: 6mm, 7mm, 8mm, 10mm, 12mm, 15mm, 19mm, 21mm, 23mm, 26mm, 28mm, 30mm, 32mm, 35mm, 39mm, 41mm, 45mm, 50mm & 64mm.

Polished holes 45mm upwards any size plus counter sunk holes (both sides).

Add polish to a glass edge or corner. Not only will the glass edges be smooth after arrising but adding a polish will provide a more professional finish and a shiny polished edge.


    • Flat grind
    • Flat polish


Unfortunately we cannot offer bevelled edge or mitre edge finish.

Furnace capabilities
Minimum glass size: 300mm x 100mm.

Maximum glass size: 4200mm x 2100mm.

Size limitations apply for 4mm and 5mm glass.

Toughened processing, holes and cut-outs

12mm substances and above require a minimum Flat Grind finish.

Distance between edge of glass and edge of cut-outs must be at least 4x the glass thickness.

No cut-out is to exceed 1/3 of the total area of the panel. Corner cut-outs to be at least 2x the glass thickness.

No cut-out is to exceed 1/3 of the total area of the panel. Centre cut-outs to be at least 2x the glass thickness.

Internal radius corners must be minimum of the glass thickness.

Polished internal radius corners will have a minimum radius of 15mm on all thicknesses.

Minimum hole diameter is 6mm but be must equal to, or greater than the glass thickness.

Distance from edge of hole or cut-out to the corner of the glass must be at least 5x the glass thickness.

Custom laminate capabilities

Minimum glass size: 300mm x 600mm.

Maximum glass size: 3250mm x 1900mm.

Toughened custom laminate glass requires a minimum 1.52mm interlayer.

Interlayer types


Sentry Glass (SGP).

Manual spray booth

No limitations in size.

Limitations are based on maximum glass size for the application.


Automatic line

Maximum size: 4200mm x 1700mm.

Minimum size: 100mm x 300mm.

All capability dimensions and limitations are subject to change without notice.

Contact Us

17-21 Riversdale Road
Newtown VIC 3220
1300 241 305

66-70 Export Drive
Brooklyn VIC 3012
1300 241 305


© 2017 The Edge Glass & Stone. All rights reserved.